Smart Life/TUYA Smart pairing quick guide

Please be sure to ONLY use 2.4 GHz WiFi, that your location and Bluetooth are ON, and that you only pair ONE bulb at a time.

Smart Life Quick Guide

· Click the blue (+) button on the top right corner

· Under "Add Manually", go to "Lighting" on the top left and once there, select "Light Source (Wi-Fi)"

· Sign in to your WiFi and make sure your location and Bluetooth are on

· Answer the questions and follow the prompts as best as possible

TUYA Smart Quick Guide

· Click the orange (+) button on the top right corner

· Under "Add Manually", go to "Lighting" on the top left and once there, select "Light Source (Wi-Fi)"

· Sign in to your WiFi and turn your location and Bluetooth ON

· Power on your light (you can only pair ONE bulb at a time)

· Turn your light on and off 3-7 times until the light starts to blink

• • RAPIDLY BLINK- check the “Confirm indicator rapidly blink” prompt and hit Next
  • SLOWLY BLINK – on the top right corner, change the pairing mode to AP Mode instead of EZ Mode and check the “Confirm indicator slowly blink”
    • follow the Connection steps by going into your WiFi settings and connecting to the bulbs hotspot

· The bulb should now commence to pair

 

You may also watch our setup video: https://www.amazon.com/vdp/65a6fedee0d14f28ac006f2672545788?product=B07V5MZD46&ref=cm_sw_em_r_ib_dt_JOvRpn0T6pOTa

If you are still having trouble, feel free to send us an email or give us a call at [phone] and we can guide you through the process via a live troubleshoot.